Caring for natural fibres

Care & Maintenance

Sisal, seagrass, jute and wool are naturally hard-wearing. A little regular care, and quick action when something spills, will keep your rug looking its best for years.

The golden rule

Act fast, blot gently, dry completely.

1

Act straight away

Prompt attention is the key to preventing a permanent stain. Remove solids and soak up liquids immediately.

2

Blot, don’t over-scrub

Scrubbing too hard can lift the natural colour from the fibres. Work gently, from the outside of the mark in.

3

Dry it thoroughly

Make sure the spill is fully absorbed and the area is completely dry. A towel, fresh air or a hairdryer held at least 20 cm away all help.

Everyday care

  • Unroll it straight away. Lay your rug flat as soon as it arrives. Left rolled up for a long time, it can curl or bubble.
  • Vacuum regularly to keep grit out of the weave. Use suction only, not a rotating brush or beater bar.
  • Rotate it every 6 months so it wears evenly.
  • Avoid strong direct sunlight, which can fade natural fibres over time.
  • Keep it dry. Natural fibres don’t suit damp or wet areas.

Spills & stains

Spill happening right now? Emergency Stain Care: Natural Fibre Rescue Our step-by-step guide to lifting a fresh spill safely, using your HOST kit or a little detergent and water. Read the emergency guide →

Or find the type of spill below and follow the steps. If you’re unsure, try a small, hidden area first, or call us before you start.

Liquid spillsThe first thing to do with any wet spill
  1. Place a towel or colourfast cloth over the spill.
  2. Stand on it with both feet and keep treading until most of the moisture has been absorbed.
  3. Then follow the steps for the type of spill below.
SolidsFood, mud and anything you can lift off
  1. Gently lift the solid off with a suitable utensil.
  2. Using water, a mild detergent and a sponge, scrub the area lightly.
  3. Dry the area as described under liquid spills.
Mild spillsNon-greasy food, mud and water
  1. Act immediately. Scrape or brush the spill off the rug (a vacuum cleaner can help), then soak up what’s left with a cotton towel.
  2. Using water and a sponge, scrub the area lightly.
  3. Dry with a towel until nothing more is absorbed, then open the windows so the rug can air.
Medium spillsCoffee, tea, oils, grease, sauces, milk, blood and more

Includes beetroot, blood, butter, chocolate, cooking oil, coffee, cordial, cream, curry, egg, grass, gravy, grease, milk, mustard, olive oil, water-based paint, salad dressing and tea.

  1. Act immediately. Scrape or brush the spill off (a wet/dry vacuum can help) and soak up what’s left with a cotton towel.
  2. Wash with a natural detergent, such as wool wash or dishwashing liquid, with no bleach or brighteners. Use a soft scrubbing or dishwashing brush to gently work into the weave.
  3. Soak up the excess and repeat a few times until the spill is diluted. Work from the outside in, feathering the outer edge.
  4. Remove excess water straight away. The area will look darker until it dries, which can take from an hour to a few days. Warm airflow or a hairdryer helps; don’t let it get too hot.
  5. For larger spills, have the rug professionally cleaned using water extraction as soon as possible.
AcidsFruit juice, red and white wine, pet and baby accidents, vomit
  1. Act immediately. Scrape or brush the spill off (a wet/dry vacuum can help) and soak up what’s left with a cotton towel. Press down on the towel, moving to drier parts of it as you go.
  2. Wash with a natural detergent, such as wool wash or dishwashing liquid, with no bleach or brighteners. Use a soft brush to gently work into the weave.
  3. Soak up the excess and repeat until the spill is diluted. Work from the outside in, feathering the outer edge.
  4. Remove excess water straight away and let it dry with warm airflow. Don’t heat the fibres directly.
  5. For larger spills, have the rug professionally cleaned using water extraction as soon as possible.
Other spillsInk, nail polish, candle wax, oil paint, polish, bitumen
  1. Wipe and soak up the excess. Make sure the room is well ventilated with no naked flames. Most candle wax can be lifted off with pointy-nosed pliers or a knife.
  2. Use the right solvent: white spirits or mineral turpentine for most, alcohol for ballpoint ink, and acetone for nail polish.
  3. Work it in gently with a soft brush or cotton bud, from the outside in, and soak up the excess. Repeat as needed, then let the solvent evaporate naturally.
  4. Always test a small, hidden area first, as some stains can spread.

Looks lighter after drying? That’s usually just a cleaner patch rather than bleaching. Having the whole rug cleaned using water extraction evens it out.

Fabric Protection

A professionally applied treatment that helps your rug resist everyday spills and makes cleaning easier.

Cleaning kits

The HOST® dry extraction kit, made for natural-fibre rugs, so you can deal with marks the right way.

Need a hand?

Not sure how to treat a stain? Talk to us before you start.